Anti-corrosion and fireproofing protection

antykorozja daas
antykorozja
Zdjęcia na blog-14

We specialize in works in the following scope:

– Corrosion protection of engineering structures and structures,
– Passive fire protection (fireproofing) of engineering structures and structures,
– Corrosion protection of bridge and viaduct structures,
– Corrosion and fire protection of engineering structures using industrial rope access (mountaineering techniques), for which we hold an international IRATA certificate,
– Repair, maintenance and restoration of old paint coatings on engineering structures and structures,
– Performing expert evaluations of corrosion damage, developing documentation for the repair of the existing paint coating – anti-corrosion system,
– Performing corrosion protection projects for newly built industrial facilities.

PREPARATION OF THE SURFACE FOR PAINTING OF PAINTING SYSTEMS, WE PREPARE IN THE CLASSES OF:

(cleaning by hand and with power tools)

(abrasive blasting)

(high-pressure water jet cleaning at 2500 bar – hydroblasting/waterjetting)

PAINTING SYSTEMS WE APPLY:

– By airless (hydrodynamic) spray,
– In justified cases with a roller or brush.

When performing corrosion protection work, we use our many years of experience, NORSOK standards and ISO standards, among others, such as:

NORSOK M-501
EN ISO 8501 preparation of steel substrates before application of paints and similar products,
EN ISO 12944 paints and varnishes. Protection against corrosion of steel structures with̨ protective paint systems,
– our work managers are certified quality controllers of anti-corrosion coatings(FROSIO, TÜV Rheinland).

Final cleaning service of the Industrial Plants

finalne czyszczenie obiektów przemysłowych

Final Cleaning

In highly specialized Energy Facilities, as well as other Industrial Plants, the level of cleanliness and aesthetics is as important as the modern technologies used. Therefore, specialized industrial final cleaning of the entire facility is a crucial element of the preparation of installations, industrial halls, or power plant units for commissioning and taking over for operation.

Final cleaning of objects

Our comprehensive service with the use of industrial vacuum cleaners, high-pressure washers, and manual cleaning, meets the highest requirements set by End-Users, even in the most difficult conditions.

Rope access techniques enable us, to work without the need to install costly scaffolding and without interfering with the active operation of the installation.

In many cases, industrial cleaning is the first stage before professional corrosion protection of post-assembly damage. We provide partial and comprehensive cleaning of steel structures and installations, as part of a comprehensive service of preparing the facility for commissioning and operation.

IMPORTANT!

CLEAN AND PROTECTED SURFACES FOR YEARS

The installation of technical infrastructure and commissioning works can lead the newly assembled steel structure into poor technical and aesthetic condition. And after all, when building a new facility, you want it to look new, right? We will help you bring it to the condition, in which it left the factory.

PROFESSIONALISM AND ORGANIZATION

By carrying out the works on power facilities for many years, we have gained experience in safe and timely performance of the tasks as well as in the proper maintenance of documentation.

KNOWLEDGE + EXPERIENCE = SAFENESS

In the field of steel structures, the most warranty repairs are those of anti-corrosion coatings. Invest in your safety and using the services of the company that has theoretical knowledge and extensive practical experience.

ON TIME

At the final stage of the project, time plays a huge role. For many years, we have developed methods of performing work and we know the rules of the Energy Industry. We can properly manage the project, taking into account the two most important variables: time and budget.

Industrial facades

fasady przemysłowe daas

At DAAS Group, we offer comprehensive implementation of industrial facades. We provide, among others preparation of the technical design, delivery of materials, flashing and assembly of the structure on site. The implementation of the project is supervised by a qualified team, cooperating with experienced mountaineers, ensuring the highest quality of services.

What are the functions of facades?

Preventing water from entering the building

Thermal and sound insulation

Air permeability control

Wind resistance

In our offer addressed to clients, we offer:

– Removal and disposal of old facades (concrete panels, sandwich panels, ceramic walls, etc.),
– Delivery and installation of a steel substructure for a modern facade,
– Straightening the plane of the facade,
– Delivery and installation of sandwich panels and facade cassettes,
– The manufacture, supply and installation of flashings,
– Installation of roofing (from sandwich panels and other, made according to individual customer expectations, such as trapezoidal sheet, mineral wool, PVC membrane),
– Supply and installation of window woodwork and entrance gates.

What do you gain?

We want to meet the individual requirements of each project, which is why we focus on innovative solutions in planning and assembly. Thanks to this, we can adapt to the unique needs of our customers, providing them with an industrial facade that meets their expectations.

Our reputation is based on quality, timeliness and safety. We will be happy to take up another challenge. If you are looking for a partner who will provide you with comprehensive façade solutions that meet the highest standards, we are at your disposal.

Rope Access Work

1EBBBFEC-9883-4853-AE96-55D40628A749

The company employs a team of highly qualified rope access specialists with internationally recognized IRATA certifications, which allow us to carry out industrial rope access assignments all over the world.

Work at height is not for amateurs – our employees have hands-on experience in rope access jobs, they use specialized equipment, which is certified and checked for proper functioning every day. We have extensive experience in execution of contracts both on the Polish market, and abroad.

Why are industrial climbers necessary when working at heights?

Industrial climbers are able to safely and professionally perform work at very high heights that are unattainable for an untrained person. The climbers can reach places, they wouldn’t be able to reach using scaffolding, thanks to rope access techniques. Almost nothing is impossible for them.

Our team performs anti-corrosion and fire protection painting, as well as final cleaning of industrial and energy objects, using Rope Access Techniques (RAT). Our employees support also the assembly of steel structures and facades, especially on the high buildings.

IRATA

has established procedures and guidelines associated with the work for rope access.

TRAINING SYSTEM

is considered the best in the world and widely accepted.

Environmental Benefit

Rope access doesn’t require the use of invasive access equipment.

FACTS

A number of projects in construction, civil engineering and water engineering are carried out using rope access techniques.

Services in the range of Wind Turbines

Zdjęcia na blog-8

The number of active wind turbines in Europe is increasing, which creates the demand for conservation works.

DAAS rope access technicians with GWO, SEP and IRATA certificates, as well as certified drone operators, can take care of it.

We will do for you:

  • inspections of blades (with the use of rope access or with thermographic technique, using drones)
  • blade damage repair
  • inspections of wind turbine towers
  • repairs of anti-corrosion system
  • support in the assembly of turbines

Why is a wind turbine inspection necessary?

Snow, hail, rain, lightning are just some of the weather factors that wind turbine elements are fight daily basis. The blade of a wind turbine can be damaged by other factors as well. Such reasons may be: extreme loads or manufacturing defects, which most often lead to microdamages. The most common defects that are detected during wind turbine inspections belong: cracks, damage, peeling paint, deformation, corrosion, lightning, water ingress or oil leakage. These include the tower, shovels, nacelle and hub.

In the absence of preventive consequences, any wind turbine failure can cause wind farm owners many problems and huge financial losses. Most often, such situations are related to repairs and waiting for spare parts, which unfortunately increases downtime. Therefore, it is worth taking precautions early enough to avoid similar incidents.

ADVANTAGES OF INSPECTING WIND TURBINES FROM THE AIR

THE ABILITY TO SEE THE DAMAGE IN DETAIL

BETTER ASSESSMENT OF THE DEGREE AND EXTENT OF DAMAGE

THE ABILITY TO PERFORM MINOR REPAIRS DURING THE INSPECTION

THE ABILITY TO STORE DATA AND PHOTO AND VIDEO DOCUMENTATION AND ITS ANALYSIS OVER TIME

Industrial marking

znakowanie przemysłowe

As part of final works on industrial and energy facilities, appropriate marking is an important step on the way for the future operation of the facility. We mark technological devices to show the flow direction, type of transported medium, operating parameters, identification of the equipment or process lines, and its reference to the P&ID diagram.

In the scope of the comprehensive service of preparing the facilities for the commissioning stage, DAAS Sp. z o.o. also offer full marking of the facility and equipment, both in terms of technological marking and industrial HSE markings at the Plant.

 

If some of the equipment has not been marked after assembly, and the scaffolding has already been disassembled – this is not a problem for us, because we will quickly and effectively mark the missing spots, using rope access techniques.

Industrial Drone Inspections

Drone Inspections

Our company also conducts inspections with the DJI Matrice 300 RTK drone using thermography and high-resolution cameras with a built-in LIDAR sensor, from which a “photo grid” or a cloud of points is obtained. Then, the obtained data can be used to create high-quality 3D models and orthoimages. The use of such technology ensures effective technical monitoring of facilities. 

The equipment equipped with a suitable thermal imaging camera enables the detection and visualization of temperature differences on the tested surfaces. This allows the drone operator to quickly and precisely identify areas of increased temperature, which can indicate potential problems (leaks, insulation problems, electrical shorts, etc.). 

High-resolution cameras, on the other hand, allow for detailed images and high-quality video. This allows the operator to thoroughly examine selected structures, structural elements, installations or devices. High-resolution images provide clear and detailed information, making it easy to identify faults, damage or corrosion. In addition, the stored images and video can be used as documentation to monitor changes over time and plan maintenance activities. 

We use an industrial drone to: 

  • photovoltaic farm inspections, 
  • power transmission lines, 
  • GSM telecommunications towers and inspections in the boiler. 

We also check project progress and structural damages, leaks (e.g. leaks in transmission pipes and insulation damage). 

inspekcje dronem

SAFE AND NON-INVASIVE INSPECTIONS

Accurate inspection in hard-to-reach places.

HIGH MEASUREMENT ACCURACY

A collection of accurate data and measurements supports analysis and taking appropriate actions.

HUMAN RISK REDUCTION

Limited risk of accidents related to working at heights.

TIME AND COST SAVINGS

Drones speed up the inspection process, leading to time and cost savings compared to traditional methods.

REDUCED TURBINE DOWNTIME

Regular drone inspections help identify problems at an early stage, helping to minimize wind turbine downtime.

If you would like to know more about supporting your inspection needs, please contact us. 

UHP Cleaning

hydrojetting daas

In our company, the priority is to use modern and effective methods in every area of our services. That is why we offer you hydrojettingan innovative approach to surface cleaning and preparation, based on the use of advanced ultra-high pressure washers. Regardless of the scale of the order, our professional team ensures quick and accurate execution of the work, which allows you to achieve excellent results. Thanks to hydrojetting, we can effectively remove any dirt, sediments, paint or tarnish, leaving the surface clean, smooth and ready for the next stages of work. 

How does hydrojetting work?

Hydrojetting is an extremely effective and safe method of cleaning surfaces, which is based on the use of the powerful force of a high-pressure water stream. But how exactly does it work? 

The hydrojetting process is based on the use of the phenomenon of fragmentation of material particles by directing a stream of high-pressure water onto a given surface. The liquid hits the brittle material, leading to cracking of the structure. The result is crevices, micro-cracks and the disintegration of a uniform surface into smaller elements. 

It is at this point that hydrojetting shows its extraordinary effectiveness. Broken and disintegrated material fragments are then easily removed by a continued stream of high pressure water. This precise and controlled cleaning method allows you to effectively remove layers of old paint, plaster, rust and other contaminants, without the need for chemicals or excessive physical effort. 

Hydrojetting is an innovative solution that removes all obstacles in an ecological, effective and safe way, restoring surfaces to their original purity and readiness for further work. By choosing hydrojetting, you decide for effective cleaning without compromise. 

What do we do with the hydrojetting method?

  • cleaning the facades of buildings 
  • cleaning heat exchangers 
  • cleaning outside buildings, removing plaster from buildings 
  • cleaning of steel surfaces, tanks
  • cleaning of chimneys and chimney coolers
  • removal of corrosion, paint, rubber and bitumen coatings
  • renovation of concrete surfaces 
  • clearing of pipelines and other pipe installations 
  • uncovering reinforcement in reinforced concrete structures 
  • removal of mortar, lime or tar residues 
  • removal of paint from asphalt 
myjka

Is hydrojetting safe for the objects being cleaned?

The hydrodynamic method works extremely quickly, effectively and ecologically, it is also safe for the cleaned objects. Of course, provided that the procedure is skillfully carried out by qualified employees. 

The hydrojetting procedure is preceded by a preliminary diagnosis of materials and determining which layers and to what depth are to be removed. The next step is to select the appropriate parameters of the water stream to crush unnecessary elements, leaving the rest intact, refreshed and clean, ready for further processing. Each material – concrete, steel, asphalt – requires different treatment, so it is necessary to have specialist knowledge and experience in the discussed field. 

Benefits of using the hydrojetting method

OPTIMAL DURABILITY AND SURFACE PROTECTION

Removing dirt and tarnish prevents their accumulation and potential damage to the building surface.

REMOVING ORGANIC SUBSTANCES

Hydrojetting is effective in removing moss, algae and other organic substances that may be deposited on building facades.

SPEED AND EFFICIENCY

The hydrojetting method enables effective cleaning of larger surfaces in a shorter time compared to traditional cleaning methods.

ECO-FRIENDLY APPROACH

Hydrojetting uses clean water under high pressure, meaning no chemical cleaners or detergents are required.

Why DAAS?

We have devices with ultra-high pressure of 2500 bar, which allow you to remove strongly adhering paint coatings and even expose reinforcement in reinforced concrete structures. We employ qualified employees who have the necessary knowledge and experience in carrying out the hydrojetting procedure. We can also perform key works with the use of pressure washers on high objects, then we will use rope access techniques. 

We ensure fast execution of the order, high standard of execution of the tasks entrusted to us and competitive prices. By accepting an offer from our company, you can be sure that hydrojetting will be carried out professionally, effectively and with full respect for the safety of the facility. 

 Feel free to contact us. 

zespół daas

Cleaning the heating surfaces of energy boilers

Cleaning the heating surfaces of power boilers is an important process ensuring optimal parameters of their operation and maintaining high availability. This process is also necessary as part of preparation for repair work or quick failure removal. Our experience and competence in the field of abrasive blasting and the use of rope access techniques ensure effective and quick implementation of such an important task. 

czyszczenie kotłów

Other services: 

  • works inside the boiler, including the disassembly of the brickwork / lining with the use of water under the pressure of 2500 bar, minimizing damage to the pressure elements compared to traditional methods, i.e. chipping, 
  • assembly: secondary structures and industrial insulation, 
  • delivery and installation of: platform gratings and corrugated platform sheets as well as fire barriers, 
  • performance of resin floors.